Clean Air & Clean Water Solutions for Your Plant

Water/Wastewater Treatment Blog

Home|Water/Wastewater Treatment Blog

Clarifier Drive Torque: Operating Use of Torque

2020-06-01T14:44:21-04:00

Normally a clarifier runs at one torque value for 90 – 98% of the time. The drive unit should be designed for this running torque and should protect from excessive loads that would require it to run above its design requirements. Optimum ratings for running, alarm, and shut-off should be specified for a clarifier drive unit based on the intended use of the clarifier.

Clarifier Drive Torque: Operating Use of Torque2020-06-01T14:44:21-04:00

HELP! My Oil Water Separator (or CPI Separator) is Constantly Clogging!

2020-06-01T14:51:15-04:00

CPI Separators are susceptible to frequent clogging. The Monroe X-Flo Separator Plate Pack provides exceptional oil separation but also easily sheds solids due to larger spacing between separator plates.

HELP! My Oil Water Separator (or CPI Separator) is Constantly Clogging!2020-06-01T14:51:15-04:00

Monroe Ships X-Flo LT Mobile Clarifier in 2 Days for Emergency Clarifier Bypass at Food Processing Plant

2020-01-07T08:29:52-05:00

A temporary solution was needed to bypass a Secondary Clarifier while the repairs were being made. The customer contacted Monroe, and a unit was available from Monroe’s inventory to ship right away.

Monroe Ships X-Flo LT Mobile Clarifier in 2 Days for Emergency Clarifier Bypass at Food Processing Plant2020-01-07T08:29:52-05:00
Go to Top