System Design
The Monroe Spiral Tube Oil Mist Collector
is a two stage unit and does not require filter media for primary
mist removal.
The spiral tubes provide a high level of
mist agglomeration and removal without using filters. Centrifugal
force and impaction provide the mechanism for mist removal.
Dirty air is propelled down several spiral shaped impaction tubes
and a fluid film is created. The oil drains into the collector
bottom. Air changes direction 180 degrees, then enters the second
stage HEPA type filter typically rated at a minimum 95% efficiency
at 0.3 micron particle size.
Ideally suited for production machining operations with water
soluble, synthetic or mineral coolants.
Oil Re-entrainment Eliminated
Due to the unique internal design of the Monroe mist collector,
the cleaned air will not re-entrain collected pollutants
after the primary stage. This improves the efficiency of
the separation process and extends the life of the optional
final filters.
|
|
 |
High Efficiency
The advanced design of the Monroe Spiral Tube Mist Collectors
provide maximum mist and oil collection efficiency in a mechanical
collector. Air processed by the Monroe Spiral Tube Mist Collectors meet
air quality standards for in-plant discharge as well as outside
exhaust. Discharging clean, filtered air back into the work area
can significantly reduce climate control costs.
Materials of Construction
The Monroe Spiral Tube Mist Collector features heavy gauge mild
steel and stainless steel construction for years of efficient performance.
Welded seams and built-in lifting hooks provide rugged durability.
HEPA Type Filters
The Monroe Spiral Tube Mist Collector is available with specially
constructed HEPA type fiberglass filter cartridges as the optional
final filter system. These filters are normally supplied with a
95% efficiency rating at 0.3 micron. Final filters have a long
service life because the majority of airstream contaminants are
removed by the spiral tube stage. Slide-out design for easy filter
removal is included.
Special Features
Large, easy to open access doors for
all serviceable areas.
An AMCA rated fan on the outlet
side of the collector with either a direct coupled motor or a "V" belt
drive.
Quiet operation. Rubber isolation
fan connection and sound attenuators are available if needed. Under
80dba is typical.
Integral differential pressure gauges are
available to indicate when filter maintenance is required.
Complete electrical controls are
available to meet customer specific requirements.
Many Configurations Available
Monroe Spiral Tube Mist Collectors can be configured to meet
specific needs with numerous options available to provide maximum
efficiency in any application.
Spiral
Tube Mist Collector, download pdf (188k)
Mist, Dust & Fume Control
Brochure, download pdf (1.72Mb)
Return to top
|