Multi-Stage Oil Mist Collector
Self-contained, Single Unit Design
The Monroe Multi-Stage Oil Mist Collector is designed to
collect and remove airborne oil mist, smoke, and sub-micron vapors
generated by operations such as high production machining and cold
forming. It is a multiple stage collector that has proven capabilities
exceeding 99% efficiency on many installations.
After installation of Monroe Multi-Stage Oil Mist Collectors,
high production machining areas using water soluble, synthetic
or mineral coolants can discharge clean, filtered air back into
the work area, reducing system costs.
Broad Range of Industrial Capacities
The Monroe Multi-Stage Oil Mist Collector is available in
capacities from 500 CFM to over 80,000 CFM in a single unit and
may be integrated with existing ductwork and ventilation systems.
Designed for Minimum Maintenance
Air flow to filter media ratio is held low to prevent saturation
blocking. This eliminates down-time due to collector malfunction
and minimizes periodic changing of filter media.
The Monroe Multi-Stage Oil Mist Collectors are designed for continuous
draining during operation, resulting in typical filter media life
of 4,500 hours or more, even under heavy inlet loading.
Design Leadership
The Monroe Multi-Stage Oil Mist Collector, with more filter
media, longer operating time between filter changes, and higher
collection efficiency, outperforms all other collectors in its
class. Because of slower internal velocities through the collector,
media replacement and maintenance labor costs are reduced. Collected
oil mist and solids are continuously drained from the media without
shut-down, significantly prolonging filter life and lowering overall
operating costs.
Many Configurations Available
Monroe Multi-Stage Oil Mist Collectors are available in
various configurations to meet your needs. Units can be suspended
from the ceiling or other supporting structures to conserve floor
space.
 Multi-Stage
Mist Collector, download pdf (82k)
Return to top |
