Revese Pulse Style Dust Collector
Continuous collection and removal of airborne dust with reverse pulse
cleaning of bags or cartridges, allows operation without shutdown.
- Long life bags or pleated cartridge filters
- Broad range of filter media available
- Applications up to 350 degrees F
- Easily install and remove cartridges
- Modular construction
- Capacities from 500 to 50,000 CFM
Efficient, Self-Cleaning Design
The Monroe Cartridge Style Dust Collector is designed to provide continuous-duty
collection and removal of airborne dust produced by manufacturing and
processing operations at 99+% efficiency on many installations. Through
the use of a Monroe Cartridge Style Dust Collector, these operations can
discharge clean, filtered air back into the work area reducing climate
control costs.
The Monroe Cartridge Style Dust Collector modular design incorporates
high efficiency, pleated cartridge filters to achieve maximum filter
surface area in a relatively small housing. The cartridges are
designed to provide a low static pressure drop.
Cartridge cleaning is accomplished by reverse compressed air pulses
through a few cartridges at a time, allowing continuous operation
without shut-down. These reverse pulses, with a velocity of twice
the speed of sound, break away caked dust from the cartridge so
that it can drop the collector bottom.
Top Performance with Better Filter Cleaning
The cartridges in the Monroe collector are mounted in a vertical position.
This assures that when the collected dust is pulsed from the cartridges,
it falls to the bottom of the collector.
In units with horizontal cartridges, dust pulsed from above cartridges
falls onto cartridges below. This reduces filtration capability
and additional maintenance for rotating cartridge is necessary.
This is avoided in the Monroe unit. The Monroe cartridges are easily
accessed with pull out racks when replacement is necessary.
Broad Range of Industrial Capacities
The Monroe Cartridge Style Dust Collector is available in capacities
from 500 CFM to 50,000 CFM in a single unit and may be integrated
with existing ductwork and ventilation systems.
An AMCA rated fan on the
outlet side of the collector with either a direct coupled
motor or an optional "V" belt drive.
Quiet Operation. Flexible
duct connections, fan mounting isolators sound attenuators
and fan closures are available.
Integral Pressure Gauges are
available to indicate when filter maintenance is required.
Standard dust removal is via
a slide gate. Options include rotary air locks or
an integral screw conveyor.
Complete electrical controls are
available to meet customer requirements. |
|
Special Features
Heavy gauge steel is used for
most installations, but special construction materials are available
to meet specific applications. Welded seams and built-in lifting
hooks provide rugged durability.
Large, easy to open access doors,
each with air tight seals, are provided for inspection and cartridge
servicing.
Many Configurations Available
Monroe Cartridge Style Dust Collector can be configured to meet specific needs
with options for most applications.
 Dust Collectors,
download pdf (107k)
Dust, Mist & Fumes
Brochure, download pdf (1.72Mb)
Return to top
|
